roller cover from pipe insulation
Posted: Thu Feb 08, 2018 3:35 pm
I used pipe insulation tubing, cut to size, for roller covers.
Their inside diameter was small for my roller, so I cut a lengthwise piece to fill the gap.
They do not absorb much epoxy.
https://1drv.ms/i/s!AulKPIbO4WqDv1O4g57Rxekum9kz
Their inside diameter was small for my roller, so I cut a lengthwise piece to fill the gap.
They do not absorb much epoxy.
https://1drv.ms/i/s!AulKPIbO4WqDv1O4g57Rxekum9kz