accosted by a wooden canoe

Share your photos of outing with your boat!
Post Reply
ColCollyer
Posts: 50
Joined: Thu Apr 15, 2010 5:59 pm
Type of boat I like: trapper

accosted by a wooden canoe

Post by ColCollyer »

I took my Trapper up to the Murray River for the Cup Weekend, only had time for 1 paddle, about 90 min up stream, and 15 min down stream. Sat in the front facing the other way and used a doubble paddle going up. I had to paddle backwards a few times because of the wind. I enjoyed it.
Anyway, the main reason for the post is that I got accosted on the way home by a guy wanting to sell me a wooden canoe.... turns out it is a canadian built"strip" job, about 3 inch strips at maybe 45 degrees, with the inside layers running on the other diagonal. A beautifull finish, just needing a couple of strips re glued. Dod I say it had cane seats, and a very round bottom.
What would something like that be worth ?
Cheers
Col
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: accosted by a wooden canoe

Post by jem »

Sounds like it was cold-molded from veneers. Assigning a price is tough without knowing any history of it but if it's just a home-built boat made by the seller, he's probably got about $400 invested in hull materials plus whatever he built the mold from. But if it's needing repair, that could be a sign of future needed repairs.
-Matt. Designer.
Post Reply