Page 1 of 1

1st Build 12' Piroque

Posted: Mon Dec 14, 2020 4:53 pm
by PhaseFour
New at this uploading scheme and using Snapfish for the first time. Didn't work. I used the "Tricks and Tips" recommendations for uploading but couldn't make it work. I'm new to this site and have never uploaded pics here. Do I need additional authorization for pics? Any suggestions?
Deep Sea!

Re: 1st Build 12' Piroque

Posted: Tue Dec 15, 2020 7:41 am
by jem
pics are limited too 800 x 800 pixels. Can you provide the link and I'll check it out?

Re: 1st Build 12' Piroque

Posted: Thu Dec 17, 2020 3:04 pm
by PhaseFour
Hi Matt,

I tried to reply earlier with links to my pics but the reply didn't take. I'll try again so you may see two replies of the same info.

All 22 Pics: https://www.snapfish.com/share?via=link ... 0/SNAPFISH

Single Pic: https://www.snapfish.com/share?via=link&token=1FRQPY8E1HgklE1NgIzKbw/AUS/27951767177070/SNAPFISH

Thanks for your help on this. Please advise

Jim
Deep Sea!

Re: 1st Build 12' Piroque

Posted: Fri Dec 18, 2020 7:34 am
by jem
I made the album a link people can click to view.

Re: 1st Build 12' Piroque

Posted: Fri Dec 18, 2020 12:47 pm
by PhaseFour
Thanks for the help Matt.

I really had fun building this (My first) boat. I think it is a great starter boat for the first timer. Taught me a lot but I still have much more to learn.

My next boat will be a 14' Pacific Power Dory (Seneca by Jeff Spira) for a completely different build technique. Morten Olesen's 17' Motorboat Mark V will follow the Dory. I hope to have the 17' Motorboat in the water by spring/summer of 2022.

Thanks again for your help Matt;

Jim
Deep Sea!